ingenium > products > devices > autonomous detectors

products | | |

· ·

solutions · devices · software · training

Ingenium's wide range of design devices can cater for all kinds of installations:

From detached homes, blocks of flats or offices and hotels or shops and deparment stores.

go back

devices INDEX

This product have been discontinued, it means that is no longer being sold by Ingenium and might not be supported.

SifLUX

Infrared presence detector, including light level sensor

Controls the installation according to the light level measured.

•	Maximum distance to detection: Ø5m at 2.5m height
•	Detection angle: 360o
•	Timer range: 4 minutes.
•	Output: Potential free relay (NO)
•	Maximum lout: 10A@250VAC
•	Number of operations: 1 x 105
•	Translucent box to measure light level.
•	Size: Ø70x25mm

Description

This device has two sensors: infrared presence sensor and light level sensor. It turns on the lighting when detecting presence, as long as the light level in the room it is installed is not enough.

You can adjust the time the lighting will be turned on, as well as the threshold light level, that will allow or not turning on the lighting when detecting. It is useful and very easy to install. Its design adds elegance to the room it is installed in.

Technical Characteristics

Applicable power supplies depending on the load

• Incandescent 12V lamps containing mechanic transformer

1300W

• Incandescent 12V lamps containing electronic transformer

900W

• Fluorescent lamps not compensated

900W

• Fluorescent lamps compensated Low factor

400W

High factor

58W

• Incandescent or halogen lamp 220V

2000W

* Estimated power calculated with the losses of each type of lighting.

Tensión
Supply

85-250V AC 50-60Hz

Power
Consumption

5mA @ 230V

Detection
Area

Ø5m

Adjustment
Parameters

Lighting and time

Relay
Output

Voltage free*

* Voltage free, normally open relay.

Download Installation Manual

SifLUX_installation.pdf

go back