products   |   news   |   about us   |   contact us » home  ·  email  ·   ESPAÑOL
   solutions  ·  kits  ·  devices  ·  software  ·  training
Ingenium's wide range of design devices can cater for all kinds of installations:

From detached homes, blocks of flats or offices and hotels or shops and deparment stores.

go back devices INDEX
All Ingenium products carry a two-year guarantee from defects due to materials or manufacturing.

Quality is an important part of Ingenium's company philosophy.
all or nothing actuators
2E2S
2 digital inputs and 2 digital outputs 6A Actuator
To control 2 electrical loads or 1 blind/curtain.



•  2 Low Voltage (SELV) digital inputs referred to the BUS reference.
2 Digital Outputs to potential free relays.
Can give 150mA power to other BUS devices.
Cut off capacity of the 6A output relays at 250Va.c.
Remembers last position when there are power cuts.
Programmable inputs to work with switch or push-button.
2 programmable BUS Events for each input.
Installed in distribution boxes. Size: 50x35x25mm


Description

Actuator composed of 2 outputs to a potential-free relay. It has a cut-off capacity of 6A per output and 2 low voltage inputs referred to the BUS Reference.

Up to 15 character chains can be admitted from the Development System with which to name and identify each output and input. The operational mode can also be selected in each input (Push-button, Switch or Curtains mode), and two BUS events for each input (one activation event and one deactivation event). This enables one to act upon any element of the installation from the device inputs.

Technical Characteristics

Inputs

• Low voltage 5V inputs, minimum activation current, 5mA
• Active when connected to Reference.
• Distance of maximum cable to switch or push-button, 30m.
• Configurable hardware and software filter from the Development System.

Outputs

• Deactivated: relay open
• Activated: relay closed.
• Maximum commutation current, 6A.


Supply
Voltage

9-16Vd.c
Max. Power
absorbed

1W
Current
consumed

200mA
Num.
Outputs*

2
Cut-off capacity
of each output

6A

* Potential-free outputs.


Download Installation Manual

2E2S_installation.pdf

go back

© Ingenium Ingeniería y Domótica, S.L. - All rights reserved.

Avda. de Gijón, 176, 33011 OVIEDO - Spain

Tel: (+34) 985 118 859 · Fax: (+34) 985 118 103

ingeniumsl@ingeniumsl.com